![background image](http://html1.mh-extra.com/html/zodiac/expert/expert_instructions-for-installation-and-use-manual_4037713015.webp)
14
2.4.2. Installing the pH minus suction line
•
Cut a suitable length of transparent hose from the coil (supplied) to connect the container of pH-minus to the pH
pump.
• Unscrew the connector cap
and attach the hose to the connector at the inlet of the pH pump,
see figure
.
Screw
the cap in place.
•
Drill two holes into the cap of the pH minus container,
see figure
:
- One hole suitable for the diameter of the hose ( )to aspirate the product.
- One smaller hole to prevent the container from becoming deformed during aspiration of the product.
•
Pass the free end of the suction hose ( ) through the hole made in the cap ( ) and put the ceramic weight pro-
vided ( ) and the support tip on the hose,
see figure
.
•
Ensure that all connections are correct and watertight before operating the appliance.
pH-minus
Do not place the pH-minus container directly beneath electrical equipment in the technical room to prevent
risk of corrosion resulting from potential acidic vapours.
EN