![background image](http://html1.mh-extra.com/html/zodiac/expert/expert_instructions-for-installation-and-use-manual_4037713035.webp)
34
5
❺ Remote control using Fluidra Connect and NN app
5.1 I Wiring the chlorinator to Fluidra Connect power center
The chlorinator is a connectable device: information on the status of the swimming pool can be accessed at any
moment (to check the dashboard, change a setting, etc.) from a smartphone or tablet via the
Fluidra Connect NN
app.
For this, the chlorinator must first be connected to a
Connect & Go
automation power center, following the connection
method shown below.
Connect & Go automation unit
Chlorinator
Connections:
A
D+
BLUE
GND COM
BROWN
B
D-
WHITE
•
It’s strongly advised to use a specific RS485 cable to wire the chlorinator to the Connect & Go power
center. If not available, an Ethernet cable can be used (RJ45 connectors cannot be used).
•
The Fluidra Connect NN app also provides the possibility to locate professionals who can remotely check
the swimming pool, access the measurement history, and display errors through a Fluidra Connect service
platform.
EN