![background image](http://html.mh-extra.com/html/zodiac/83718/83718_instructions-manual_936555002.webp)
2
3
3 Hand without Date / 3 Hand with Date
(Automatic STP1-11, STP3-13, SW200-1)
Setting the time
1 . Unscrew (if necessary) and pull out crown to position 1 .
2 . Pull crown out to position III (the watch stops) .
3 . Turn crown until you reach the correct time .
4 . Push crown back to position I, and screw back (if necessary) .
Setting the date
1 . Pull crown out to position II (the watch continues to run) .
2 . Turn crown until yesterday’s date appears .
3 . Pull crown out to position III (the watch stops) .
4 . Turn crown until correct date appears .
5 . Continue to turn crown until correct time appears .
6 . Push crown back to position I .
ENGLISH
Do not change the date between the hours of 10pm and 2am. This is the time when the movement
is in position to carry out the automatic date change, and any interference may cause damage to
the movement.
Automatic Winding Movement
A timepiece fitted with an automatic winding movement obtains the power to wind itself by the
movement of your wrist . It is important that your timepiece is adjusted to match the size of your wrist .
A loose fit may result in a loss in capacity of the timepiece to wind itself . When fully wound, your
timepiece has a power-reserve of approximately 42 hours . If the timepiece has not been worn for over
42 hours it is advised that it be manually wound to ensure necessary power-reserve .
Summary of Contents for 83718
Page 61: ...120 2 22 ...
Page 62: ......