MONOGRAM SYSTEMS
COMPONENT MAINTENANCE MANUAL with ILLUSTRATED PARTS LIST
BASIC PN 15900
Page 602
Monogram Proprietary – See title page for details
38-31-09
May
17/02
3. Procedure
A.
Top and Tank Assembly
Due to structural considerations, cracks, fractures, delamination and ruptures of
the top and tank assembly necessitates replacement or factory repair.
B. Motor-Pump-Filter
Assembly
(1) Motor
Assembly
Brush holder cap and Brush assembly are the only replaceable parts within
the motor assembly.
(2) Refinish
Refinish exterior painted surfaces of the motor assembly as follows:
(a) Sand all chipped, loose paint and corroded areas of the motor
assembly.
(b) Paint all exposed areas of motor assembly with one coat of epoxy
primer and a coat of epoxy enamel.
(3) Replace all damaged or otherwise illegible nameplate identification or
decals.
C.
Drain Valve Assembly
(1) Deburring and chasing of stud threads and threaded fittings is acceptable as
long as no more than two consecutive threads are damaged.
(2) Dimpled mounting plate holes may be flattened as long as hole diameter
deformation does not occur.
(3) Part number identification removed or otherwise destroyed shall be re-
applied.