7 3 013 6 1- 10 0 Rev. D
RECOMMENDED TOOLS AND MATERIALS
Putty Knife
Closet Bolts
Regular Screwdriver
Wax Ring/Gasket
Adjustable Wrench
Flexible Supply Tube
Sealant
Hacksaw
Carpenters Level
Tape Measure
REMOVE OLD TOILET
1
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line. NOTE:
If replacing valve, first shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE:
Mounting surface must be clean and level
before
new toilet is installed!
S
A
VE FOR FUTURE USE
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
!
NOTE:
Pictures may not exactly define contour of china and components.
INSTALLATION INSTRUCTIONS
ARCHIVE 1.6 gpf/6 Lpf One-Piece Toilet
Model 97920-60
ARCHIVE 1.28 gpf/4.8 Lpf One-Piece Toilet
Model 97920-28
CHAPEAU 1.6 gpf / 6 Lpf One-Piece Toilet
Model 97820-60
CHAPEAU 1.28 gpf / 4.8 Lpf One-Piece Toilet
Model 97820-28
PORCHER SOLUTIONS
™
1.6 gpf / 6 Lpf One-Piece Toilet
Model 96010-60
PORCHER SOLUTIONS
™
1.28 gpf /4.8 Lpf One-Piece Toilet
Model 96010-28
Product names listed herein are trademarks of Porcher
© Porcher 2010
Thank you for selecting Porcher - the benchmark of fine quality. To ensure this product is installed properly,
please read these instructions carefully before you begin. (Certain installations may require professional help.)
Also be sure your installation conforms to local codes.
