![background image](http://html1.mh-extra.com/html/speakman/t-5001/t-5001_installation-instructions_1341262001.webp)
800-537-2107
www.speakman.com
NEED HELP?
For additional assistance or service please contact:
INSTALLATION INSTRUCTIONS
T-5001
T-6000
One-Piece Toilet
92-T-6000-05
TOOLS & SUPPLIES NEEDED
IMPORTANT
MAINTENANCE:
Your new Speakman Product is designed for
years of trouble-free performance. Keep it
looking new by cleaning it periodically with a
soft cloth. Avoid abrasive cleaners, steel wool,
and harsh chemicals as these will dull the finish
and void your warranty.
Your new Speakman Toilet includes a premium
fill valve with an internal filter designed to trap
impurities allowing for reliable operation of the
fill valve. Periodic removal and cleaning of the
filter is recommended for optimal performance.
Please see the “Fill Valve Filter Cleaning”
section of this document for more information.
SAFETY TIPS:
Be sure to read and understand all instructions
before beginning installation.
Inspect all connections after installation.
Be sure to wear proper eye protection.
NOTE:
This installation manual covers several
models of Toilets. While the appearance of your
Toilet may differ from those shown, the
installation method is the same.
WARNING
DO NOT OVER-TIGHTEN
CONNECTIONS OR DAMAGE MAY
OCCUR.
DO NOT USE CHLORINE OR ANY
CHEMICALLY RELATED
COMPONENTS AS THIS WILL
RESULT IN DAMAGE TO TANK
COMPONENTS AND MAY CAUSE
FLOODING AND PROPERTY
DAMAGE.
USE OF CHLORINE OR
CHEMICALLY RELATED
COMPONENTS WILL VOID
WARRANTY.
Phillips
Screwdriver
Adjustable
Wrench
Level
Measuring
Tape
Supply Hose with
7/8” Ballcock End
VERIFY ROUGH-IN
1
For your Toilet to fit correctly, the rough-in distance between the finished wall to the center of the
Closet Flange must be at least 12”
Finished
Wall
Water
Supply
Valve
12”
Closet
Flange
INSTALL SUPPLY LINE TO TOILET
2
From behind, position the Supply Line up through the opening in Bowl. Connect the water supply
line to the
fi
ll valve threads as seen at the bottom of toilet tank. Tighten the connection.
CAUTION:
Do not over-tighten or damage may occur.
3
INSTALL TOILET SEAT
Install the Toilet Seat using the
instructions included within the Toilet
Seat packaging. Mounting the Seat now
will allow easier access to Toilet Seat
Mounting Hardware prior to mounting the
Toilet to the Closet Flange.
4
CLOSET BOLT INSTALL
Clean any debris out of the Closet Flange and then install new Closet Bolts into the slots of the
Closet Flange. The head of the bolt should be inserted into the slot with its threads facing upward
as shown. Once the Closet Bolts are located properly, secure into position with a Washer and
Square Nut. Wrench tighten.
5
WAX RING INSTALL
Carefully lay to Toilet onto some padding.
Firmly press a Bowl Wax Ring onto the
circular recess around the Toilet Bowl’s
Horn.