O
VERVIEW
This electronic dual
-
flush toilet conversion system fits most standard Flush Handle toilets with a
“
flapper valve
”
and is activated by a
WIRELESS REMOTE. Upon toilet use, a simple press of the button on the Remote Control activates a Flush Motor inside the tank which
lifts the flapper valve for either a Half
-
Flush (#1) or Full
-
Flush (#2) as desired, depending on how long the button is pressed. The Remote
Control has an average range of 15 feet and is linked to its Receiver to prevent interference from other wireless devices, allowing for
various options in the mounting location. The Flush Motor and Receiver/Battery Box installations are quick and easy with NO TOOLS, NO
TANK REMOVAL or plumbing skills required. Both the Flush Motor and Receiver/Battery Box are moisture sealed and run on standard
batteries (included) for up to 6 months or 5,000 worry
-
free flushes. Saves water and improves sanitation
-
perfect for children, disabled
adults, the elderly, public toilets or any high
-
use bathroom area where flushing delinquency is a problem.
P
REPARATION
Before attempting installation, PLEASE READ these Quick Start Instructions thoroughly and familiarize yourself with your specific toilet
components down inside the tank. Ensure that the Receiver/Battery Box can be clipped to the inside edge of the toilet tank without
obstructing the other components. Similarly, check that the Flush Motor will fit onto the filler tube down inside the toilet tank and
directly above the flapper valve without interference. The single large button on the Remote Control can be hand or foot activated,
so choose an appropriate location for easy access. Also note that the Remote Control uses radio signals and will transmit through
walls and doors, but the range may be reduced, so some experimentation may be required to find the optimal mounting location.
FLUSH HANDLE
LEVER ARM
C
OMPONENTS
QUICK START FlushMinder RF Wireless Dual Flush Kit Instructions
A
CCESSORIES
I
NSTALLATION (
over
)
This general instruction sheet covers the basic installation procedure for this kit. Since toilet configurations vary
widely, your particular installation may require additional steps and/or hardware. For more information, please
visit our website at
https://water
-
saver.org
or email your questions to
support
@water
-
saver.org
.
Thank You for choosing Water Saver Products ! ! !
BEAD CHAIN (6 inches)
MOUNT COLLARS
SCREWDRIVER
MOTOR MOUNTS
(2 SIZES - OPTIONAL)
(Objects not to relative scale for clarity)
AA ALKALINE (6)
CR2032 LITHIUM
FLUSH HANDLE
(Remains Functional)
“Home of the FlushSaver DIY Kits”
◊◊◊
KFM
-
RFA
-
QS Rev B
©
WSP 2023
◊◊◊
FLUSH MOTOR
BEAD CHAIN
(Objects not to relative scale for clarity)
(2 INCLUDED)
FLUSH HANDLE
PULL CHAIN
FLUSH
MOTOR
REMOTE
CONTROL
RECEIVER
BATTERY
BOX
CABLE TIES (2 - OPTIONAL)
REMOTE
CONTROL
LABELS
®
