ZMC432N Motion Controller User Manual V1.5
should be fastened with 4 screws.
→
Unit: mm
→
Mounting Hole Diameter 4.5mm
Installation
attention
⚫
Non-professionals are strictly prohibited to operate. Specifically,
professionals who had been trained related electrical equipment,
or who master electrical knowledge.
⚫
Please be sure to read the product instruction manual and safety
precautions carefully before installation.
⚫
Before installation, please ensure that the product is powered off.
⚫
Do not disassemble the module, otherwise the machine may be
damaged.
⚫
Avoid direct sunlight installation.
⚫
In order to facilitate ventilation and controller replacement, 2-3cm
should be left between the upper and lower parts of the controller
and the installation environment and surrounding components.
⚫
Considering the convenient operation and maintenance of the
controller, please do not install the controller in the following
places:
Summary of Contents for ZMC432N
Page 1: ......
