ZMC408CE Motion Controller Hardware Manual V1.5
same power supply system, this connection can also be omitted.
⚫
The E5V port is a 5V power output port, which can be used when some loads need to
provide an external 5V power input, the maximum current is 300mA.
3.3.2.
Basic Usage Method
(1)
Please follow the above wiring instructions to wiring correctly.
(2)
After powered on, please use ETHERNET or RS232 to connect to ZDevelop.
(3)
Open or close output port d
irectly through “
OP
” command, also, it can be
opened or
closed
through “ZDevelop/View/
Op
”. Please refer to “ZBasic” for details.
(4)
The PWM function, set the
frequency and duty cycle through “PWM_FREQ” and
“PWM_DUTY”. Please refer to ZBasic for
details.
(5)
Hardware comparison output can be set and opened through “HW_PSWITCH2”.
Please refer to ZBasic for details.
3.4.
AD/DA Analog Input/Output
The analog port adopts a set of 5Pin screw-type pluggable terminals with a spacing
of 3.81mm.
Summary of Contents for ZMC408CE
Page 1: ......
