First-time Setup
3.9
Connecting the cameras to the DVR
1. Connect the power adapter to the outlets.
Connect the camera power
adapter to a power outlet near the DVR. In most cases, you will have a 4-port
power splitter cable. If so, connect the female end of the 4-port splitter into the
male end of the power adapter. Refer to 1a on the diagram for reference.
2. Connect the cameras to the Siamese power and video cables.
In most
cases, your cameras will come with a cable with two separate connectors on each
end. One of the connectors is for the power, and the other is for video. Connect
the male power and video BNC end of the cables to the female power and video
BNC connectors on the camera. Refer to 1b on the diagram for reference.
3. Connect the cameras to the DVR.
Connect the male BNC connector at the
end of the cable that is not connected to the camera to the desired channel input
on the backside of the DVR.
4. Connect the cameras to the power.
Connect the male power connector at
the end of the cable not connected to the camera to a female power connector
from step 1.
5. Repeat.
Repeat steps 1-4 until you have connected all desired cameras.
Summary of Contents for Funlux
Page 1: ...1 ...
Page 2: ...2 ...
Page 13: ...Product Introduction 2 9 Rear Panel ...
