Zipro Dynamite, Manual

Page: 29 / 209

29
EN
COMPUTER MANUAL
Remove the safety film from the display before use.
COMPUTER (MODEL)
MRMSBIC05-GRN
AUTO ON/OFF
The computer is switched on when the flywheel moves
or any button is pressed. The computer is switched off
after four minutes of inactivity.
BUTTONS
• SET – sets parameter values.
• MODE – selects the parameter.
• RESET
– resets time, distance, and calories
immediately.
• RECOVERY
– helps you monitor your fitness by
measuring how fast your heart rate slows down to
the resting heart rate.
FUNCTIONS (SPECIFICATION)
SCAN
Displays all measured training parameters in a cycle. every 6 seconds
TIME
Total exercise duration, from the start to the end. 00:00-99:59 min
SPEED Displays the current speed. 0,0-99,9 km/h
DISTANCE Total distance from the start to the end of the exercise. 0,0-99,99 km
CALORIES
Total calories burnt from the start to the end of the exercise.
(The measurement is an approximation for comparing training
sessions. Do not use for medical purposes).
0,0-9999 kcal
RPM Displays cadence (revolutions per minute). 0–999 RPM
PULSE Displays the current heart rate. 30-230 BPM
SETTING COUNTDOWN VALUES
•
Press the
MODE
button repeatedly to select the parameter you want to base your training on: time,
distance, calories, or the upper heart rate value.
(The display should show only the parameter, without the SCAN option.)
•
Press
SET
multiple times to set the value and confirm it with MODE.
•
The countdown starts when you start pedalling. A down arrow will be displayed on the screen.
•
When the countdown is over, or you reach the set heart rate value, the device makes a sound.