11
Make sure keel is flush with top of BH1.
Deck chine in place.
Fitting front of deck chine in place.
Be sure that the chines are glued in so that
they match the angle of the bulkhead tops.
Hit the glue joint with accelerator. Hold it in
place for 30 seconds or so.
When you are sure the glue is cured, glue to
bulkhead 4.
Hit that with accelerator, hold for 30 seconds or
so, then move ahead to 3, then 2, then 1.
Do not glue the chine to the keel yet.
Do the other deck chine, but don’t glue it at the
nose yet.
Now you get to glue yourself to the boat! Try not
to…
Using CA, put glue on the ends of the two top
chines.
Squeeze both chines together at the tip of the
keel.
Make sure that both are even, and fit into the
notch on the top of the keel.
Hit the joint with accelerator, and hold for a
minute or so.
Try not to glue your fingers to the chines! If you
do, it could be rather embarrassing to have your
wife try to free you. She will use that story for
life!
Hint: Nail polish remover debonds CA…
Summary of Contents for VBox 2013 Edition Deep Vee Sport Crackerbox
Page 6: ...6...