8
Work Surface
We recommend that you use a straight, flat work surface.
Minimum size would be at least 24 by 48 inches.
Your work surface should be able to take screws or nails (this eliminates the kitchen
table…)
Every critical component on this hull depends on a straight, flat surface.
Do whatever it takes to get this done.
Sand the parts while they are still in the sheets.
You can lightly mark them if you want.
Remove the radio box lid frame and radio box lid from the sheet.
Put these in a safe place, away from your work area for now.
The lid frame looks exactly like the radio box lip, but is not.
Confusing these parts would be bad for the radio box…
You may want to use simple rubber band clamps for clamping the sides in place.
These are simply #64 rubber bands and pieces of 1/2x1/2 wood about 7 or 8 inches long.
These put just the right amount of clamping pressure, without distorting the chines.
Thanks to one of our customers for that.
Summary of Contents for VBox 2013 Edition Deep Vee Sport Crackerbox
Page 6: ...6...
