26
USER MANUAL
805846UK - ZIP HYDROTAP G4 V1.00 NOV 2017
TECHNICAL SUPPORT
TEL: 0345 6 005 005 EMAIL: SERVICE@ZIPINDUSTRIES .CO.UK
WWW.ZIPWATER.CO.UK
SECTION 8 LCD SCREEN
On/Off mode menu
Individual set screen
Group set screen
A
A
Note
Any attempt, during off mode, to dispense water, will bring the unit out
of sleep mode. The unit will return to sleep mode after 2 hours of non use.
Please allow sufficient time for the water to reach the set temperature after
disabling the sleep mode.
This screen allows you to select the
individual days for programming.
Only one On/Off period is allowed for
each day.
On/Off mode allows the user to turn the
unit on or off at a specific time.
To activate On/Off mode
•
Press the [MENU] button for main
menu.
Press the [Settings] button.
Enter your 4-digit password and
press [Enter].
•
Press the [Energy Modes] button.
•
Press the [On / Off Mode Menu]
button.
•
Select ‘Individual Set’ if you wish
to allocate a specific time for each
day.
•
Select ‘Group Set 1’ if you wish to
allocate the same time to all seven
days.
•
Select ‘Group Set 2’ if you wish
to allocate the same time to the
five working days (Mon-Fri) and
additional times for weekends
(Sat-Sun).
Note
Any attempt, during off mode, to dispense water, will bring the unit out
of energy mode. The system will revert to the energy mode setting after 30
minutes of non use.
•
Select ‘Group Set 1’ / ‘Group Set
2’ then press [NEXT].
•
Press button to enable and
set the On/Off time by scrolling
with the up & down arrow keys.
