802005UK - Residential (Boiling),chilled and sparkling installation instructions - Aug 2015 - v2.01
Page 27 of 40
After replacing a cylinder or after making a
gas connection, perform a leak test
Stage 1
1. Turn the gas off.
2. Using soapy water applied with a sponge, or with a
brush, cover all of the gas joints with a liberal
amount of suds.
Stage 2
1. Turn the gas on.
2. Adjust the pressure to between 2.7- 3.0 bar.
3. Inspect the joints for leaks.
4. If any bubbles appear to grow, the joint will
need to be resealed and tested again.
Faulty seal joint
CO
2
Regulator
ON - OFF knob.
Leak Test
Note
When removing hose, take care not to
lose plastic olive from the fitting.
Green indicator.
Good seal joint
