804052US v1.27 06.21 CS75 Install Instructions
Page 5 of 28
Thank you for purchasing a Zip HydroTap. Please read and follow these instructions carefully to ensure safe
and trouble free service.
What is the Zip HydroTap ?
The Zip HydroTaps are electronically controlled, filtered, Boiling, Chilled and Sparkling water, drinking
systems for kitchens and tea rooms. The HydroTap Command Centers are under bench drinking water
appliances with a dispensing faucet mounted on a sink or bench, which may be used for residential or
commercial applications. The CS75 HydroTap utilises a conventional refrigerant compressor to chill the water
and a CO
2
gas cylinder to carbonate the chilled water. Chilled water dispensed is factory set to 6 - 10 °C (43-
50°F). These units are NOT designed to be used for sanitary fixtures.
The CO
2
bottle and the water filter require periodic replacement and are covered by a limited OEM warranty.
It is important that the Installation be done safely, correctly and completely, in order to utilise all the benefits
the HydroTap can provide. The Classic HydroTap can be ordered with the Faucet Head Assembly for
Accessible use. Accessible levers are supplied with Braille caps for the visually impaired.
Usage:
The Zip HydroTap is intended for use in residential household and similar applications such as: Rural and
urban residential Kitchens, Hotels, Motels, Bed and Breakfast and other residential type environments
General Product Features
HydroTap CS
Command Center
ON-OFF Switch
IEC Socket
110-120V, 60Hz
OR
230V, 50Hz
