804052US v1.27 06.21 CS75 Install Instructions
Page 11 of 28
Clearance
405
Air Space
Min 200mm (8”)
3mm (0.15”) buffer to
ensure ventilation gap
Section 2
Ventilation
2.2 Recommended Installation Diagram
When installing air flow ducts, the following tools will be required:
•
Jigsaw and a 12mm (½”) Drill
•
Keyhole or Wall Board saw.
2.1 Ventilation for All Models
Proper air circulation must be provided for all models. The system will operate correctly only if the
recommended air gaps are achieved during installation.
IMPORTANT: Allow a minimum clearance envelope of 50mm (2”) either side, and 200mm (8”)
above the Command Center.
Fit the 3mm (0.15”) door buffer to the inside edge of the cabinet door to allow sufficient air circulation inside the
cabinet (see diagram below).
!
