www.zinexts.com MagPurix 24 EVO User Manual
20
/
35
5.2
Start up the System
Please make sure that the plug of the MagPurix 24 EVO System is securely connected to a
grounded power socket and that the power source used is matching the rating as labeled on the
MagPurix 24 EVO System.
5.2.1
Basic Settings
The MagPurix 24 EVO System is provided with default settings, calibration and pre-loaded sample
processing protocols, that allow immediate use routine procedures at the laboratory.
The important information about the software of the MagPurix 24 EVO System, such as instrument
serial number and current software version installed, is displayed at the bottom of the screen by
clicking the Status Bar “ ”.
5.2.2
User Management
◼
After logging in as administrator, the Main Screen opens. Click the “Settings” button, and on
the Settings Screen click the “Admin” button.
User Privileges
The following user types (roles) are available on the MagPurix 24 EVO System:
User
- limited privileges
Admin
- full privileges for test management, user management and system settings
Service
- additional privileges for system calibration and maintenance
5.2.3
Door Lock and Door Sensor Switch
◼
After logging in as administrator, the Main Screen opens. Click the “Settings” button, and on
the Settings Screen click the “System” button. On the right side under “Sensor”, turn on door
sensor.
Note:
Please keep all doors closed all the time during instrument operation.