INSTALLATION AND OPERATING INSTRUCTIONS:
2-jaw parallel gripper, hybrid, HRC-04 series
15
Zimmer GmbH
●
Im Salmenkopf 5
●
77866 Rheinau, Germany
●
+49 7844 9138 0
●
+49 7844 9138 80
●
www.zimmer-group.com
DDOC00269 / d
EN / 3/31/2020
7.3 Installing the electrical system
7.3.1 Installing the wiring
►
Connect the supply cable to the gripper and the control system.
Ö
You can find the corresponding supply cable on our website.
INFORMATION:
The cables that are used by Zimmer GmbH feature a minimum bending radius of 10 x the outer diameter.
This bending radius must not be undershot!
►
All IO-Link cables that are installed in the grippers have an outer diameter of 5 mm and thus have
a bending radius of 50 mm.
►
Freely suspended cables must be secured to prevent excessive motion loads or pinching.
