Settings
7
Page 8
(1) Start settings
1. Start menu:
Individual options for the start settings.
The selection is made directly on the corresponding line.
(2) Language
Selection of the language.
The selection is made directly on the corresponding line.
(3) Welcome
Pressing the "Welcome" field opens a window with an alphabetic keyboard to
enter a welcome message for the start-up screen.
Pressing the “OK” key saves the text that has been entered.
Pressing the “X” key returns you to the configuration menu.
(4) OK
Pressing the key switches to the start-up screen.
(5) Version
Pressing the “Version” key opens a window with information about the current
software version.
(6) Load default
Pressing the “Load default” key restores the default factory settings.
(7) Colour scheme
Pressing the key switches between the two display settings. A bright or dark
screen can be selected.
(8) Brightness
The brightness is adjusted via the two arrow keys.
(9) Volume
The volume is adjusted via the two arrow keys.
(10) Handpiece
counter status
In this display panel, the meter reading of any connected handpiece(s) is
shown.
(11) Maintenance
After pressing the (1) key in the maintenance menu,
the maintenance
message, which appears after 1.8 and 2 million collisions, can be turned off.
Deactivation results in a one-time maintenance message after 1.8 and 2
million shocks.
The maintenance message can only be deactivated by customer service.
The following points are not relevant for the user. They are used only by
customer service.
1