manualshive.com logo in svg

Zimmer enPulsPro, Instructions For Use Manual, Page: 14 / 53

Share
Download
Zimmer enPulsPro Instructions For Use Manual Download Page 14

 

Device Set-Up 

 

 

6

   

 

 

Page 6 

 

 

Note: 

If the enPulsPro not mounted on the intended wagon, 

ensure

 

that the enPulsPro is placed on a stable surface. 

 

 

Note: 

 

Make sure that the power switch on the device is set to "0" .

 

 

 

Connect mains cable  Connect the mains cable to the corresponding socket (13) on the device and 

connect the cable to the power.

 

 

 

Note: 

The device may only be connected to earthed sockets. 

 

 

Connect handpiece  Connect the handpiece to one of the sockets provided 

Channel I (15) or Channel II (16) and set it down.

 

 

 

Note: 

Make sure that an applicator head is used in the handpiece and that this is 

correctly and completely screwed on.

 

 

 

Connect the 

footswitch 

Connect the footswitch to the designated socket (17), and place it on the floor.

 

 

 

Switching the device 

on 

Switch on the device with the power switch (6).

 

 

 

Switching the device 

off 

The device is switched off using the power switch (6).  

In order to completely disconnect the device (all-phase) from the mains, 

remove the mains cable.

 

 

 

Caution

!

 

All cables must be protected against jamming or other mechanical damage. 

 

Summary of Contents for enPulsPro






















































Reviews:

No comments