Z8FMC16100 Series Motor Control Development Kit
Quick Start Guide
QS005406-0111
Page 13 of 15
Figure 6. Zilog Developer Studio II Active Screen
l.
Slowly increase the adjustable 24 V DC power source from 0 V DC to 24 V DC. The
3-phase motor should start running. If the motor does not run, start over from Step c
on page 10.
m. Use the Direction Switch S1 to change the direction in which the motor spins. Use
Speed Potentiometer R7 to adjust the motor RPM.
For more information about using Zilog Developer Studio II and building projects for your
Z8FMC16100 Series Motor Control Development Kit, refer to the
Zilog Developer Studio
II – Z8 Encore! User Manual (UM0130)
.
