Z8FMC16100 Series Motor Control Development Kit
Quick Start Guide
QS005406-0111
Page 12 of 15
g. Select the correct debug tool using
Project
←
Settings
←
Debugger
←
Debug
Tool
. For example, Select
USBSmartCable
when using the USB Smart Cable.
Click
F1
for additional information about how to set up the debugger.
h. Click
OK
.
i.
Click the
Rebuild All
icon to build the project. Wait for the
build to complete as indicated by the
Build Complete
confirmation in the
Status
window at the bottom of the screen.
j.
Click the
Reset
icon to connect and download the code to the
development board.
When the
Option Bits Warning
dialog box appears (see Fig-
ure 5), click
Yes
to continue.
Figure 5. Option Bits Warning Dialog Box
k. Click
Go
to start the program.
The screen changes, as illustrated in Figure 6.
Note:
Reset
Icon
Rebuild
All Icon
Go
Icon
