Operating Manual
ZIGOR SOLAR HIT3C
© ZIGOR
43
Technical specifications:
The data that can be monitorised are as follows:
Irradiance, by
Ambient temperature, by means of a PT-100 temperature probe.
Panel temperature, based on the assumption that all the PV field panels will have a similar temperature.
The irradiance cell temperature is measured by means of a PT-100 probe.
Wind speed. This measurement is an option within the ZIGOR SOLAR MET1. The measurement is made
by means of an anemometer.
General parameters
Nominal supply voltage
6 ~ 28 Vdc
Maximum consumption
90mW
Dimensions
266x266x35mm
Temperature range
From -20ºC to +50ºC
Protection level
IP-54
Weight
1.2 Kg
Communications with ZIGOR SOLAR
HIT3C
RS-485
Calibrated cell
Type of sensor
2 calibrated cells
Measurement range
0 ~ 1200W/m
2
Intrinsic measurement error
±0,2%
Measurement error against master
±2%
Temperature measurements
Type of sensor
PT100
Temperature measurement range
From -20ºC to +100ºC
Maximum error
±0.8ºC
Anemometer
Operating voltages
12 ~ 230Vac/Vdc
Maximum admissible current
500mA
Maximum switched power
10W
Maximum efficiency
200Hz
Protection level
IP-65
Estimated service life
20 years
Start-up speed
4 km/h
Maximum admissible speed
150 km/h
Dimensions
150x150x200mm
