11
Connection Example
Int
roduc
tion
Example is showing our HDBaseT transmitter (ZIG-POEWP-100) connected to the HDBaseT receiver (ZIG-
POE-RXAV) Amplified audio output for direct connection to speakers, LAN ports for almost anything you
choose and for controlling/setting up the devices, relays, a 4K scaler and IR and RS232 control and
functionality.
1.
Connect sources to POEWP
– HDMI and VGA w/Audio
2.
Connect RXAV to Display via HDMI
3.
Connect Ethernet cable between HDBaseT transmitter (ZIG-POEWP-100) and RXAV (HDBaseT)
Ports
– this will also provide power on the ZIGPOEWP-100
4.
Connect LAN switch/router to LAN 1 port
– this is the switch or router that issues IP address (DHCP
server)
5.
Connect your PC or MAC to the same switch/router. The DHCP server will issue IP addresses to both
devices separately.
6.
Turn on the Source, TV and RXAV
7.
Locate the serial number sticker on each RXAV and make note of it. The web address for the given
unit is
where the xxxx are the last 4 digits of the serial number. Ex. If the serial
number is 154320000015, then the web address is
. This is necessary to distinguish
multiple units from colliding in the network before their names are changed by the customer. The ZIG-
POEWP-100 operates similarly...i.e.
8.
You can also locate the devices with Bonjour. If you do need to connect directly from a PC or Mac to
the LAN 1 or 2 port in the RXAV without a router (LAN) you can expect up to 5 minutes for the address
to be resolved.
9.
Once connected the user interfaces will be available for you to evaluate, change, enter commands,
etc.