16
ZigNet: Control Page (continued)
Sy
st
em
C
ont
rol
We can delay a command by using the Delay keyword.
The formatting is as follows:
Delay-
xxxx, where “xxxx” is the delay in milliseconds.
Commands not specified will be ignored.
Example:
ASCII will ignore HEX values.
Test:
Tests the command in the input box
Save:
Save the command in the input box. Note: be sure to press save before leaving the page.
Button Press:
Sends a command when the CMD button is pressed.
HDMI Cable Connect:
Sends a command when an active HDMI cable is connected
HDMI Cable Disconnect:
Sends a command when an active HDMI cable is disconnected
VGA Cable Connect:
Sends a command when an active VGA cable is connected
VGA Cable Disconnect:
Sends a command when an active VGA cable is disconnected