9
Front Panel
Int
roduc
tion
1.
Source select
– turns blue when HDMI is selected and off when VGA is selected.
Source selection can happen 4 ways:
a. First source connected automatically is active and sent to display.
b. By pushing this button the source will toggle.
c. Via ZigNet
d. Via 3
rd
party control
2.
HDMI Input
– Connect HDMI cable from source, up to 4K UHD.
3.
VGA Input
– Connect VGA cable here from PC/MAC or use a breakout cable to
connect Component, or composite (use Green wire) video sources.
4.
CMD Button
– this button can be used for almost anything you want – it is
programmed via ZigNet and is accessible via 3
rd
party control or ZigNet. Use it to
set lighting, trigger screen mask or drop screen. If using with RXAV use one of its
relays.
5.
Audio Input
– 3.5MM stereo audio input jack. The audio going into this jack
follows the VGA/Multi-port
Note: Auto-Switching function
– if you remove an active source – and another source is
connected then it will switch to the new source immediately. Additionally, as soon as you
connect either source, if none are connected, that port will become active immediately.