Z I E H M V I S I O N I N S TA L L AT I O N M A N U A L : M e c h a n i c a l
Page 6
MAN 06-0015: Rev. A
Mechanical
Movement
The C-Arm is capable of moving in a 115º arc: 90º from horizontal to
vertical, and 25º beyond the vertical plane; rotating in the vertical plane
around the horizontal cross arm (+225º), or swinging from side-to-side
(+12º). Test C-Arm movement and brakes in the following manner:
1. Release one brake and verify full the full and unrestricted move-
ment of the C-Arm. Secure the brake.
2. Repeat step one for each brake.
3. Release the hand brake on the mobile cart by pulling the handle up,
and check that the cart moves freely and can be steered by turning
the brake/handle.
4. Turn on C-Arm power at the monitor cart control panel. Raise and
lower the C-Arm
2-3: .ON / OFF Keys
Caution:
The starting circuit is always powered - even when power is
switched off! To completely disconnect from Mains Power, remove the
power cord from the wall power outlet.
CDRH Report
Follow the instructions in the CDRH report and record the results into
the report.