Ziehm Imaging, Inc.
Vision Installation Manual
MAN 06-0015, Rev. A
Page 10
M a i n t e n a n c e R e p o r t : L a b e l s
1. Refer to Figures 1, 2, 3 and 4 and Table 1. Inspect the C-Arm and verify that all
applicable labels for the model being installed are present and legible. If labels are
required, contact the Ziehm Service department
2. Inspect the C-Arm and verify that the certification, serial number, and model
labels are present and legible. Record the model number and serial number in the
box below. If new labels are required, contact the Ziehm Service department.
32
33
34
35
Table 1
Labels on the Ziehm Vision (USA)
MANUFACTURED: MONTH:
YEAR:
WARNING
REMOVAL OF SKIN DISTANCE
CONE IS AGAINST THE RULES AND
REGULATIONS.
MANUFACTURED BY:
ZIEHM IMAGING GMBH
D-90451 NURNBERG -ISARSTSSE 40 GERMANY
WARNING
DO NOT USE CASSETTE LESS THAN
24 X 24 cm IN CONJUNCTION WITH
23 cm IMAGE INTENSIFIER.
Component
Model No.
Serial No.
X-ray control
Image intensifier assembly
X-ray generator
