SW32V
11820-0701-01
Page
21 / 22
www.ziehl.de
13
Technical Data
Control voltage Us:
Rated connection
AC/DC 24-270 V, 0/45...65 Hz, < 5 VA
DC: 20.4...297 V, AC: 20.4...297 V
Output relay:
2 x change-over contact
Switching voltage
Max. AC 415 V
Switching capacity
max. AC cos φ = 1
5 A 250 V
Switching capacity max. DC (resistive)
0.3 A DC 300 V 5 A DC 30 V
Nominal operational current Ie
AC-15 Ie = 3 A Ue = 250 V
DC-13 Ie = 2 A Ue = 24 V
DC-13 Ie = 0.4 A Ue = 120 V
DC-13 Ie = 0.2 A Ue = 250 V
Contact service life, mech.
30 x 10
6
operating cycles
Contact service life, electr. cos
φ = 1
5 x 10
5
operating cycles at AC 250 V / 3 A
Voltage measurement:
Measurement voltage DC
DC 10.0…600V
Measurement voltage phase
– phase
AC 26.0…830 V (< 5V: 0 is displayed)
Measurement voltage phase
– N
AC 15.0…480 V (< 5V: 0 is displayed)
Frequency AC measurement
40…100 Hz
Measurement time DC
DC Mean value over 50ms
Measurement time AC
< 50ms
Measurement accuracy DC
0.5% of measurement ± 1 digit
Measurement accuracy AC (with N)
> 100V: 0.8% of measurement ± 1 digit
< 100V: 0.8% of measurement ± 5 digits (res. 0.1V)
Measurement accuracy AC (without N)
> 100V: 1.0% of measurement ± 1 digit
< 100V: 1.0% of measurement ± 5 digits (res. 0.1V)
Measurement principle
Real root mean square measurement (both half waves)
Hysteresis
Adjustable
1…99 V
Accuracy asymmetry
± Asymmetry in % * 0.15
Hysteresis asymmetry
Fixed 1%
Measuring functions
3-phase with/without N, 1-phase against N, DC
Response time
Adjustable
0.05 (±15ms)…99.9 s
Reset time
Adjustable 0(>200ms) … 999 s
Delay with Us on
4s +
8
A1_
8
8
dof
8
for K1 (
8
A2_
8
8
dof
8
for K2)
Test conditions
EN 60255
Rated impulse withstand voltage
6000 V
Overvoltage category
III
Pollution degree
2
Rated insulation voltage Ui
AC 690 V
Operating time
100 %
Permissible ambient temperature
-20 °C... +55 °C
EN 60 068-2-2 dry heat
EMC - immunity
EN 61000-6-2
EMC - emission
EN 61000-6-4
Housing:
Mounting type
V4
Front-to-back size
55 mm
Dimensions (W x H x D)
90 x 70 x 58 mm
Wiring connection single strand
ea. 1 x 4 mm
2
Finely stranded with wire end ferrule
ea. 1 x 2.5 mm
2
Protection class, housing
IP 30
Protection class, terminals
IP 20
Mounting
Snap-on fastening on 35 mm mounting rail acc
EN 60 715 or with M4 screwed attachment
(additional bar not included in the scope of delivery)
Weight:
approx. 200 g
We reserve the right to make technical changes