ZIEHL-ABEGG ZAS0, Operating Instruction

Page: 7 / 72

2.6 Notes on special types of danger
2.6.1 Electrical energy
" Only use original fuses with the speci fi ed fuse rating. Switch off the drive/machine immediately
in case of faults in the electrical energy.
" The electrical equipment of the drive must be inspected regularly. Defects such as loose
connections or charred cables must be repaired immediately.
" The main switch must be operated to turn on the power to the drive.
2.6.2 Gas, dust, steam and smoke
" Only perform welding, cutting and grinding work in or on the lift when it is expressly permitted
(danger of fi re and explosion).
" Dust and in fl ammable materials must be cleaned from the drive and especially the brakes and it
must be covered with suitable material and suf fi cient ventilation provided before welding, cutting
and grinding.
" Observe the national regulations, where necessary, for working in con fi ned spaces.
2.6.3 Oils, greases and other chemical substances
" Observe the safety regulations applicable for the product when handling oils, greases and other
chemical substances.
" Handle hot operating and auxiliary media with care (danger of burning or scalding).
3 Product overview
3.1 As-delivered state
" The scope of the delivery is listed in the delivery documents. Check for completeness upon
receipt.
" Be on the alert for any damage to the packaging or the drive.
" Report any damage due to transport to your shipping agent.
" Transport damages are not covered by the ZIEHL-ABEGG SE guarantee!
3.2 Transport
3.2.1 General
Information
The instructions in the chapter "Safety instructions" must be observed!
" ZIEHL-ABEGG SE drives are packed by the manufacturer for the types of transport and storage
agreed upon.
" Transport the elevator machine either with the original packing or at the casted eyelets or
eyebolts using adequate hoists.
" Transport motor without any additional load and taking the centre of gravity into account!
" The threads in the shaft ends are not to suit eyebolts to transport the motor.
" Avoid excessive vibration and shocks.
Warning!
" Transport must be carried out under consideration of the safety regulations and the centre of
gravity of the drive.
" Only use lifting gear and load handling devices with suf fi cient load capacity for transport.
" Transport the drive with reasonable caution. This will avoid injury to persons and damage to the
drive. Bumping the free shaft ends can cause damage to the drive!
Danger!
" The gearbox is fi lled with oil. Transport and store the drive only in a vertical position!
2ULJLQDORSHUDWLQJLQVWUXFWLRQV
ZAS0 Product overview
A-TBA11_06-GB
Part.-No. 01008051-GB
7/72