Analog input E3 (Base setup)
Function
Description Function E3
OFF
no function
1E
external Setpoint
2E
external Manual mode (from
2.01
)
3E
Sensor average to E2 (from
2.01
)
4E
Sensor comparison to E2
5E
Sensor difference to E2 (from
2.01
)
6E
Sensor for Setpoint (from
2.01
)
7E
Measurement
Digital output K1
Function
Description Function K1 (not inverted)
OFF
no function
Relays remain always de-energized
1K
Operating indication
Operation without fault, reports enable
“
OFF
”
2K
Fault indication
Energized for operation without fault, for enable
“
OFF
”
not energized. De-energized at line,
motor and controller fault, Sensor fault dependent on programming, external fault at digital
input.
3K
External fault separate with message at digital input (factory setting if terminals bridged)
4K
Limit modulation
Over or falling below modulation
5K
Limit
“
E2
”
When over or falling below limits for input signal
“
E2
”
6K
Limit
“
E3
”
When over or falling below limits for input signal
“
E3
”
For modes as controller from
2.01
7K
Setpoint Offset
Deviation between actual value and setpoint to high
8K
Group control
Switching on fans depending on modulation
For modes as temperature controller with additional functions
2.03
9K
Heating function
Switch ON point: temperature = Se/- Offset
Switch OFF point: Temperature around hysteresis over switch ON point
10K
Cooling function
Switch ON point: temperature = Se/- Offset
Switch OFF point: Temperature around hysteresis below switch ON point
Limits GW E2, GW E3
Function
Description Function GW E2, GW E3
OFF
no function
1L
Indication with the centralized fault of a programmed relay (IO allocation Function
|
2K
|
).
Warning symbol in display,
“
AL
”
code in events memory.
2L
Is merely displayed in the events menu as message
“
msg
”
.
Operating Instructions
AM-PREMIUM(-W)
–
model series
Menu tables
L-BAL-E095-GB 1618 Index 006
Part.-No.
85/90
