9.8
Menu group Info
Info
Menu group Info
Info for mode speed controller
1.01
Speed
ECblue
Speed
Frequency
Icontrol / Fcontrol Basic
Inverter output frequency.
Motor current
Display of motor current, different from the input current (metering precision approx.
+/-10 %)
ECblue
Set external1
Display of the currently active default signal.
The percentage corresponds to the internal actuation of the power component under
consideration of the settings
“
Min. speed
”
and
“
Max. speed
”
.
0 - 100 %
0 - 10 V, 10 - 0 V, 0 - 20 mA, 20 - 0 mA, 4 - 20 mA, 20 - 4 mA
Display:
The device operates at:
Set
“
external1
”
Signal to
“
E2
”
/
“
GND
”
Icontrol / Fcontrol Basic
Set external1
Set
“
External2
”
Signal to
“
E3
”
/
“
GND
”
Set
“
Intern1
”
Menu
“
Set Intern1
”
Set
“
Intern2
”
Menu
“
Set Intern2
”
E2 Actual
If E2 is in IO Setup on Busmode, the value of the analog input E2 is displayed.
If function not active, display
|
- - - - -
|
E3 Actual
If E3 is in IO Setup on Busmode, the value of the analog input E3 is displayed.
If E3 Function =
|
7E
|
the value of the analog input E3 is displayed.
If function not active, display
|
- - - - -
|
Info for mode controller
2.01
...
6.01
E2 Actual
Current actual value measured on the sensor 1.
Depending sensor-type in: mbar, m
3
/s, m/s, Pa, %, bar, m
3
/h,
°
C, V, mA, etc.
E3 Actual
For operation with two sensors display for
“
2 actual
”
.
If function not active, display
|
- - - - -
|
Setpoint1
Display of the active target value at which the device operates.
“
Setpoint1
”
Menu
“
Setting
”
“
Setpoint2
”
Menu
“
Setting
”
“
Ext. Setpoint
”
= setting by external signal 0 - 10 V. With activated manual mode the
display constantly changes between actual value and value for manual mode.
Operating Instructions
AM-PREMIUM(-W)
–
model series
Programming
L-BAL-E095-GB 1618 Index 006
Part.-No.
39/90
