ZIEHL-ABEGG AM-PREMIUM, Operating Instructions Manual

Page: 84 / 90

Function Description Function A
9A ECblue = speed output
ratio: actual speed / rated speed (for 10 V actual speed = rated speed)
Icontrol / Fcontrol Basic
Proportional to the output frequency
10A Operating indicator
ECblue:
•
Output 0 V @ Speed < 50 rpm
•
Output 10 V @ Speed > 70 rpm
Icontrol / Fcontrol Basic
•
output 0 V @ Speed < 4 Hz
•
Output 10 V @ Speed > 7 Hz
Digital inputs D1 + D2
Function Description Function D1 + D2
OFF no function
1D Enable (remote control) “ ON ” / “ OFF ”
2D External error
3D “ Limit ” ON / OFF
4D Switch over “ E1 ” / “ E3 ”
For mode speed controller 1.01
5D Switch over “ Set Intern1 ” / “ Set Intern2 ”
6D Switch over “ Intern ” / “ Extern ”
For modes as controller from 2.01
5D Switch over “ Setpoint1 ” / “ Setpoint2 ”
6D Switch over “ Intern ” / “ Extern ”
7D Switch over “ automatic control ” / “ Speed manual ”
8D Switch over control function (e.g. “ heating ” / “ cooling ” )
10D “ Reset ”
11D Setting Max. Speed “ ON ” / “ OFF ”
13D Switch over direction of rotation “ right ” / “ left ”
14D “ Freeze function ” = maintain momentary modulation value
16D Busmode / analog input Switch over for E2
Analog input E2 / E3 (IO Setup)
Mode Description E2 Modus
0 E2 min. / E2 max. without function (factory setting)
1 Offset / turn
2 Signal range
Operating Instructions AM-PREMIUM(-W) – model series Menu tables
L-BAL-E095-GB 1618 Index 006 Part.-No.
84/90