OPERATION
41
6.3 Cross auger / feed
Fig. 55
Cross auger
The cross augers are fitted with fitting irons (B) in
the area of the channel opening. Optionally availa-
ble transport claws (K) for the transport of the har-
vest can be fitted here.
The number of the claws (K) or their width can differ
according to the model of picker and depend on the
feeder channel width of the respective harvester.
It is important that the transport claws are only fitted
in front of the channel opening.
Fig. 56
Baffle plate of the cross auger
The height of the baffle plate is adjusted via the
screw connection (V).
The clearance between the auger and the hood
should be as large as possible to allow sufficient
passage for corn leaf, leaf and even stalks.
Switch off the diesel motor when per-
forming all work on the cornheader.
B
K
V
