Ziegler & Brown ZG3GK, Operating Instructions Manual

Page: 10 / 36

10
secure, and that all necessary components (such as secondary regulators and manual
shut offs) are included where regulations require them. Once this is done, the barbeque
cannot be moved. It is a permanent fixture of the property.
Bayonet Point : Alternatively, you can have the gas fitter terminate the gas line using a
“bayonet point”. This allows you to connect and disconnect the barbeque using a special
hose and bayonet termination. Such a hose is provided in the Natural Gas manufactured
versions of this barbeque. For LPG installations, an appropriate hose is available from most
barbeque retailers, this hose must be fitted to the BBQ and leak tested before use.
Even if your barbeque area already has a bayonet point, you will still need to call upon
a gas fitter to ensure gas pressure is sufficient for your barbeque, and to ensure your
barbeque functions correctly before leaving. Where a gas fitter is required, the gasfitter
must test the safety and operation of the appliance before leaving, including gas pressure,
ignition and burner operation.
Conduct a leak test before use.
•
For cart models do not attempt to connect to the gas supply before the BBQ is
secured properly into its cart.
•
If connecting to a Natural Gas supply, ensure thar the model you have is labelled
“ NATURAL GAS ” and therefore designed to run from Natural Gas.
•
If connecting to an LPG supply, ensure that the model you have is labelled
“
UNIVERSAL LPG
” and therefore is designed to run from LPG.
•
Check that all the control knobs are in the OFF position before any attempt is
made to connect the hose to the gas supply.
•
Attach the safety chain provided to a strong point at the bayonet connection point
and to the cross brace on the right of the barbeque. This is to prevent the hose
from being able to be over-stretched.
•
If connecting to a Natural Gas supply use the hose that is pre-assembled with the
barbeque and connect the bayonet to the bayonet outlet.
•
If connecting to an LPG supply, use the separately supplied LPG bayonet hose that
has been fitted and leak tested and connect the bayonet to the bayonet outlet.
•
Should there be any concern in making the correct connection, please contact
your local Barbeques Galore store.
To the installer :
You must instruct the consumer on safe operation, and ensure these
instructions are left with the consumer before leaving the site.