Getting Started
Note: This configures sockets 3D1 and 5D1 for 64 Kbyte ROMs and
sockets 7D1 and 9D1 for 128 Kbyte RAMs.
Memory mapping
information may be found in the jumper configuration tables for W55-
W59 in Appendix A.
Powering Up STD ROM
Once the EPROM,
RAM,
jumpers,
and cable are correctly
configured, install the ZT 8809A into the STD bus card cage. Be sure
to attach the D-type connector end of the cable to the appropriate IBM
PC or compatible.
•
Follow these steps to power on the system with a PC or
compatible.
1.
Turn on the PC and wait for the DOS prompt.
2.
Turn on the STD system.
3.
Insert the disk containing the STD ROM/Borland’s Turbo
Debugger in drive A.
4.
Type
A:td -r
and press the carriage return key.
5.
Borland’s Turbo Debugger should come up, communi-
cating across the VTI link with your STD system.
2-11