12. Microsoft Windows 3.1
60
About
The About button displays a dialog box with the version number of WinMode and a
copyright notice.
Help
For help on WinMode, select the Help button. The main help screen contains an image
of the WinMode screen. Place the cursor over the field(s) that you need help with. When
the mouse pointer changes to a hand, click to display the help text for that field. Click
again to make the pop-up text disappear.
RECONFIGURING WINDOWS 3.1
If you are in Windows, run WinMode to reconfigure the Windows 3.1 drivers.
If you are in DOS, proceed as follows to reconfigure the Windows 3.1 drivers.
1. Verify that Windows 3.1 and the extended resolution drivers are already installed on
your computer.
2. From your Windows directory, at the DOS prompt, type SETUP
[Enter]
to run the
Windows SETUP.EXE program. Follow the instructions on the screen. When you
come to the screen that lists the hardware and software components such as display
adapter (e.g. VGA, CGA), keyboard type, and mouse type, go to the Display
selection (using cursor keys to move the highlighted bar) and press
[Enter]
.
3. You will see a list of drivers and their associated resolutions, for example:
CIRRUS LOGIC 5434 v1.23, 1280x1024x16
CIRRUS LOGIC 5434 v1.23, 1024x768x16
CIRRUS LOGIC 5434 v1.23, 640x480x16
CIRRUS LOGIC 5434 v1.23, 640x480x256
CIRRUS LOGIC 5434 v1.23, 640x480x64K
CIRRUS LOGIC 5434 v1.23, 800x600x16
CIRRUS LOGIC 5434 v1.23, 800x600x256
4. Highlight the desired choice by moving the cursor to the correct display driver, and
then press
[Enter]
.
5. Setup will prompt you that the driver is already in your Windows directory and give
you a chance to replace it. Use the existing driver.
6. Continue with the remainder of the setup procedure.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
