background image

090317-NUT-SPLIT-MULTISPLIT-EN 

4/24 

EN

 

1-  GENERAL POINTS 
 

 

This air conditioning unit is composed of an outdoor unit, an indoor wall/ceiling/cassette/ducted/vertical unit for 
split models, or several indoor units for multisplit models.  

 

The outdoor unit (which includes the compressor) are designed to be installed outside the building. 

 

The indoor unit(s) are designed to be installed inside the building. 

 

The outdoor unit and the indoor unit(s) are linked by flare connections and electric cables. 

 

The air conditioning unit automatically regulates the temperature of one or more rooms, bringing you comfort 
and temperature control according to your requirements. 

 

It also has a dehumidifying function for each room (cooling mode) 

 

It uses advanced technology. 

 

It works safely and reliably. 

 

This air conditioning unit is a highly effective piece of equipment that can make you considerable savings in 
energy consumption. 

 
 

2-  PRECAUTIONS 
 

To avoid actual bodily harm or injury to users or other persons, you must adhere to the following instructions. 
 
If you do not follow these instructions, you risk using the appliance incorrectly which may lead to actual bodily harm 
or damages, the severity of which are indicated below. 

 

To prevent injuries caused to users or to others as well as material damages, the following instructions must be 
followed. 
Any incorrect operation carried out following failure to read these instructions may lead to serious physical injury 
and material damages.  
The severity of these risks is indicated by the following symbols: 
 

 

 

This symbol indicates danger of death, the risk of bodily harm and material damages. 
The following tables summarise the main precautions to be taken in terms of use to avoid the most serious risks to 
persons, the product and its environment. 

 

 
 
 
 

 

Connect to an electrical power 

supply and ensure that the 
appliance is plugged into the 
socket correctly. 

Do not switch the unit on or off by 

plugging in or unplugging the 
socket. 

Do not use damaged or non-

recommended cable or 
sockets. 

Failure to do so can cause 

electric shocks or fire due to 
excessive temperature. 

This can cause electric shocks or fire 

due to excessive temperature 
elevation and short-circuiting. 

This can cause electric shocks 

or fire. 
If the cord or the plug are 
damaged in any way, have them 
replaced by an approved 
technician. 

Do not alter the length of the 

power cable or connect it to 
other electrical appliances.  

Do not touch the apparatus with 

wet hands or use in a damp 
environment. 

Do not direct the airflow 

directly onto occupants. 

This can cause electric shocks or 

fire due to overheating. 

This can cause electric shocks. 

This can damage their health.  

Always ensure that the 

appliance has been earthed 
correctly. 

Do not allow water to infiltrate the 

electrical components. 

Always install a suitable 

electrical protection and a 
separate power circuit. 
 

The absence of earthing can 

cause electric shocks. 

This can cause damage to the 

machine and may cause electric 
shocks. 

If this is missing, there may be 

a risk of fire and electric shocks. 

Disconnect the power supply 

if unusual sounds are heard or if 
smoke or strong odours begin 
to emanate from the product. 

Do not use the electric plug if 

damaged or wrongly connected. 

Do not open the unit whilst 

operating. 
Always ensure that the unit is 
switched off and arm the 
electrical protection. 
 

Failure to do so can cause 

electric shocks or fire. 

This can cause electric shocks or 

fire. 

Risk of bodily harm. 

Summary of Contents for SPF B Series

























Reviews: