090317-NUT-SPLIT-MULTISPLIT-EN
18/24
EN
6- MAINTENANCE
IMPORTANT: before cleaning the indoor unit, ensure that the product is switched off.
Use a dry, clean cloth to clean the plastic parts of the indoor unit and the infrared remote control.
A lightly dampened cloth can be used to clean the indoor unit if it is very dirty.
Do not use a damp cloth to clean the remote control.
Do not use anti-dust products as these may affect the plastic parts.
Do not use solvents, petrol or any other petrol derivative or corrosive chemical products or any products
containing polishing powders.
Cleaning the dust filters:
•
Dismantling the dust filters (wall-mounted model)
Lift up the front panel
Unclip the filters from their fixings
Remove the filters
•
Dismantling the electrostatic PLASMA filter (wall-mounted model)
Open the front grille of the indoor unit and wait for 10 minutes before touching the PLASMA filter
(important - risk of electric shocks).
PLASMA filter
Dismantling the PLASMA filter
•
Dismantling the dust filters (wall-mounted model)
Dismantling the front panel and the filter following diagrams A and B:
- Open the front grille by pushing in the 2 tabs as shown in diagram A.
- Disconnect the electric cable from the holding panel
- Dismantle the front grille as shown in diagram B.
•
Dismantling the dust filters (DUCT model)
In the case of assembly with air inlet grille (option):
- Open the front grille by pushing in the 2 clips as shown.
- Disconnect the electric cable from the holding panel
- Dismantle the front grille as shown.
