090317-NUT-SPLIT-MULTISPLIT-EN
10/24
EN
6 LOCK
This locks the remote control settings. Pressing this button a second time deletes this function.
7 TIMER OFF
This allows the user to programme a duration after which time the product stops.
8 TIMER ON
This allows the user to programme a duration after which time the product starts.
9 ON/OFF
This starts or stops the product.
10 FAN SPEED
This allows the user to select the fan speed of the indoor unit in the following order: automatic speed -> LOW (low
speed) -> MED (medium speed) -> HIGH (high speed) -> back to automatic speed-> Etc.
In automatic speed mode, the product adjusts its own speed depending on the difference between the set
temperature and the temperature in the room.
11 TEMP
This increases the set temperature.
12 AIR DIRECTION
(Wall product - cassette product – floor/ceiling product)
This fixes the initial position of the vents for the automatic sweeping motion.
Wall-mounted product: this allows the air blow outlet position to be reversed: upwards or downwards.
13 LED DISPLAY
(Wall-mounted product)
This allows the set temperature display to be hidden or displayed on the display panel.
14 TURBO
(Wall-mounted product)
This allows the room temperature to be reached more quickly in cooling mode (high-speed fan mode).
15 OK
(Floor/Ceiling product)
For validation of timer setting.
16 CLOCK
(Floor/Ceiling product)
For setting the time displayed
17 CANCEL
(Floor/Ceiling product)
For cancelling the timer setting.
18 TIME ADJUST
(Remote control R11HG/E)
For adjusting the hours and minutes on the timer.
to increase and
to decrease.
19 SWING
(R05/BGE remote control)
For selecting automatic horizontal sweep or for fixing the angle of the vent for supplying air around the initial fixed
position using the AIR DIRECTION button (see above).
20 CLEAN AIR
This function allows the ION/PLASMA filters operating and purifying the atmosphere against pollen and impurities.
21 FOLLOW ME (IMMI model only)
This function allows selecting of the sensor which will regulate the premises. Press the button to choose between
the air return sensor inside the indoor unit (preset configuration) or the temperature sensor built-in the IR remote
controller for the temperature regulation control.
