40
41
NTP Server Port:
Time setting:
Computer Time:
Set the time manually:
3) User Management
Select users:
User name:
Password:
Password confirmation:
4) Version upgrade
Update file:
Note:
Set the NTP server port (effective when NTP Enabled, default 123,
users can modify on their own)
Click on the "Save" button,it will be valid when display "Save successful".
Set time mode (to choose the computer time synchronization, NTP
server time synchronization,or set manually).
Set the computer synchronization valid.
Click calendar icon on the right to set time manually (only
effective when time setting is MANUAL).
Set the user type (the default administrator,Common User 1,Common
User 2 optional)
set the user name (Select User Administrator default admin; select a
common user1 default user1; to select a common user 2 default user2;
user can modify their own)
Set a password(Select User Administrator default admin; select a common
user1 default user1; to select a common user 2 default user2; user can
modify their own).
Confirm the input passwords are the same or not.
Click on the "Save" button to display the "Save successfully" message,then the set
is to take effect.
Note: Please note the case-sensitivity of the user name and password.
If login page by a common user's name and password ,one does not have configuration
privileges but can only operate to preview,playback,logoff.
MCU version V2.0.0.16 2015-12-18
Camera version V2.0.0.16 2015-12-18
Focus version V2.0.0.6 2015-12-11
Users only read the version information above which is consistent with the menu
version but can not modify.Different types of the machine has different information.
Click "Browse ..." installation, to select the upgrade file in the pop-up window.
Click on the "Upgrade" button, the upgrade dialog will appear. the device will reboot
automatically after update successfully. (Note: make sure the power and network is
keeping connected during the process.or the upgrade will fail)
After version upgrading, please restore default setting with the following options:
a,Restore default setting through web configuration
b, Restore default setting through camera menu menu
c, Restore default setting using shortcut key combination* # 6 restore on remote controller
If use option a,the account and passwords will also be restored to default.
5) Restore factory setting
6) Reboot
4.2.8 Logout
4.2.9 Wireless network
1
Network settings
Wireless network configuration:
Network interface enable:
DHCP:
IP address:
Note:
Subnet Mask:
Default Gateway:
SSID:
Encryption:
Password:
Note: SSID and password should be filled correctly, otherwise the wireless WiFi
connection will not be available after restarting.
2)WiFi hot link
3)Wireless WiFi login page
Click on pop-up "Restore Factory Defaults" button and choose “yes” or “no”,then the
device will restart automatically and restore factory setting .
Click on the pop-up "Reboot" button and choose “yes” or “no”,then the device will
restart automatically
Point "Logout" pop-up "Confirmation" dialog; select "Yes" or "No",choose “Yes” to
exit the current page and return to the user login interface again.
If the user's equipment has a wireless network module,Web page "Network Configuration"
has "Wireless Network" configuration page,the specific configuration is as follows:
can check,to set the following items after checked.
checkable, it can obtain IP automatically if checked.
set wireless WIFI IP(default 192.168.1.250,if checked DHCP,IP could
assigned automatically)
wireless IP address can not be in the same segment with wired IP address.
Set the wireless IP subnet mask (default255.255.255.0)
Set the wireless IP default gateway (default 192.168.1.1)
The user can modify their own (the default test)
checkable,the password can be set after checked.
can set password, password can be changed if only encryption checked.
Click the "Save" button, when display "Parameter saved successfully", itt will take effect
Click on the “search” button to search the WIFI hotspot.
Double-click the dialog box after searched user WIFI hotspot,and then input password
to connect WIFI. It connected successfully after shown “successful connect” window.
If you do not check the above configuration DHCP (automatically obtain IP),then open
the browser,enter the wireless network IP address in the address bar (default
192.168.1.250),press Enter to log construction;If you checked DHCP,then you obtain
IP automatically, just login specific router or switch user interface settings to view
the allocation of IP address.
）
!"#$
Information and Communication PTZ Camera
!"#$
Information and Communication PTZ Camera
