34
35
Click Configuration to enter into the device parameters setting page
There are the following options: Local configuration, audio configuration, video
configuration, network configuration, PTZ configuration, internet access configuration,
system configuration, detailed description see the following table.
4.2.4 Configuration
Menu
Local configure
Audio configure
Video configure
Network configure
System configure
Including video preview mode, record video packing time,
record video storage route settings etc.
Including audio compressing format, sampling frequency,
sampling precision, compressing code rate settings etc.
Including video encoding, video parameters, character-
overlapping, character size, video output setting etc.
Including basic parameters, Ethernet, DNS, wireless network
setting etc.
Including equipment property,system time,user management,
version update,Reset,Reboot device settings etc.
Explanation
1) Local configuration
Video Preview Mode:
Recording packing time(minute):
Recording/Snapshot file storage route:
Save
2) Audio Configuration
Switch:
Compressing format:
Sampling frequency:
Sampling precision:
Compressing code rate:
Note: 1. Click “SAVE”,it will remind”Enable has changed. Restart the device to
take effect after the success of the save.”,then please reboot the camera
to make new setting effect.
user can choose real-time priority or fluency priority: The delay
will be small when under real time priority mode and fluency will
be good when under fluency priority mode. Setting based on
the user need (Default value: real time best (1),real time normal
(2),fluency normal (3),fluency good (4) and fluency best (5)
Set recording video packing time (default is 3,
range from 1~120 minutes)
Set local recording video/snapshot file
storage route.(Default D:\MyIPCam\)
Click the
button to make settings effective.
Choose to enable the audio or not.
Set audio compressing format and the device will reboot
automatically after change (default MP3,PCM,AAC optional)
Set sampling frequency and the device will reboot automatically
after change (default 44100,16000,32000 and 48000 optional)
Set sampling precision (default 16bits)
Set audio compressing code rate (default 64bits,32,48,
96,128bits optional)
2. U3 series does not have audio input interface, only ST series has this
configuration.
4.2.5 Video configuration
1) Video encoding
Code stream:Stream:
Compression Format:
Video Size:
Stream Rate control:
Image Quality:
Rate (Kb / s):
Frame rate (F / S):
Key frame interval:
Key frame minimum QP:
Stream Name:
Note: Usually reserve live only and modify the information behind that.
Different video output mode setting,use different streams.
(Main stream,secondary stream)
Set the video compression format,save and reboot to take
it effect (primary / secondary stream default:H.264,H.265
optional)
Set video image resolution,save and reboot to take it effect (main stream
default 1920 * 1080 or 1280 * 720 optional; default secondary stream
640*320,320*180,1280*720, optional )
Set rate control mode,save and reboot to take it effect (Primary
/ secondary stream default variable bit rate,fixed rate is for option).
Set the image quality,image quality can be changed only when rate
control is variable bit rate,(main stream defaulted is better, secondary
stream default is not good, there are best, better, good, bad, worse,
worst for options).
Set the video bit rate (main stream default 8192Kb/s,64-20480Kb/s
optional; secondary stream default 2048Kb/s,64-8192Kb/s optional).
Set the video frame rate (primary / secondary stream default 25F / S,
primary stream 5-60F/S optional,secondary stream 5-30F / S optional ).
Set the key frame interval (primary / secondary stream default
75F, primary / stream 1-300F optional. secondary stream 1-150F
optional).
default 10, 10~51 for options.
When get rtsp or rtmp stream, the user can modify the stream name;
the main stream (default: live / av0), secondary stream (default:live / av1)
Click the "Save" button to display the "saved successfully" message,then settings
take effect.
2) Stream Release
Switch:
Protocol:
Host Port:
Host Address:
Stream Name:
User:
Password:
To turn on/off the main / secondary stream.
primary / secondary stream applies RTMP protocol.
server port number (default 1935,0-65535 optional)
server IP addresses (default 192.168.5.11)
choose a different stream name (live / av0,live / av1 optional).
Set the user name.
Set the password.
Click on the "Save" button to display the "Save successful" message, then settings
take effect. Method of obtaining RTSP: rtsp: // device IP address: 554 / live / av0
(av0 main stream; av1 secondary stream)
!"#$
Information and Communication PTZ Camera
!"#$
Information and Communication PTZ Camera
