Zhen Optics Z2812U, User Manual

Page: 13 / 30

22 23
Focus (near): Press ” focus+ key
(Valid only in manual focus mode)
Focus (far): Press “ focus- key
(Valid only in manual focus mode)
Auto Focus: Support
Manual Focus: Support
Press and hold the key,the action of focus will keep
continue and stops as soon as the key is released.
【 】”
【 】“
4) Focus Control
5) BLC Setting
BLC ON / OFF: support
1. Preset setting: to set a preset position,the users
should press the “ SET PRESET key first
and then press the number key 0-9 to set a relative
preset,
2. Preset Running: Press a number key 0-9 directly
to run a relative preset.
3. Preset clearing : to clear a preset position, the
user can press the “ CLEAR PRESET key
first and then press the number key 0-9 to clear
the relative preset;
【 】”
【 】”
Note: 10 preset positions in total are available by
remote controller.
Note: Action in vain if a relative preset position
is not existed.
Note : press the“ key three times continually
to cancel all the presets.
【#】”
6) Presets setting,Running,clearing
F1 Camera Address No.1
F2 Camera Address No. 2
F3 Camera Address No. 3
F4 Camera Address No. 4
【*】+【＃】+【 】:
【*】+【＃】+【 】:
【*】+【＃】+【 】:
【*】+【＃】+【 】:
7) Camera Remote Controller Address Setting
3.3 MENU SETTING
3.3.1 Main menu
In normal working mode,press MENU key to display the menu,using scroll arrow
to point at or highlight the selected items.
【 】
MENU
Language English
(Setup)
(Camera)
(P/T/Z)
(Video Format)
(Version)
(Restore Default)
]Select ]Change Value
[Menu]Back [Home]OK
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
[↑↓ [← →
LANGUAGE:
SETUP:
CAMERA OPTION:
PTZ OPTION:
VERSON:
Restore Default:
] Select:
] Change value:
[MENU] Back:
[Home] OK:
Language setting,Chinese / English
System setting
Camera setting
Pan tilt setting
camera version setting
Reset setting
for selecting menu
for modify parameters
Press [MENU] to return
Press [Home] to confirm
[
[ ↑↓
← →
3.3.2 System setting
Move the pointer to the (Setup) in the Main Menu,click the HOME key and enter
into the (System Setting) as shown below,
【 】
SETUP
Protocol Auto
Visca Address 1
Visca Address Fix OFF
PELCO-P Address 1
PELCO-D Address 1
Baud rate
9600
]Select ]Change Value
[Menu]Back
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
[↑↓ [← →
!"#$
Information and Communication PTZ Camera
!"#$
Information and Communication PTZ Camera