Zgonc yellow PROFILINE YPL 6000-D, Translation Of Original Instruction Manual

Page: 25 / 56

GB | 25
15. Troubleshooting
The table below contains a list of error symptoms and explains what you can do to solve the problem if your tool fails to
work properly. If the problem persists after working through the list, please contact your nearest service workshop.
Fault Cause Remedy
Engine does not start
Oil pressure switch tripped red LED Check oil level, top up with engine oil
No diesel fuel Top up with diesel fuel
Mechanical switch set to “STOP” Set mechanical switch to “RUN”
Diesel filter blocked Clean or replace the diesel filter
Air filter dirty Clean or replace the air filter
Diesel filter frozen due to low out
door temperature
Proceed as described in the point entitled “Win-
ter operation”
The fuse is defective Change the defective fuse
Generator has too little or no
voltage
Controller or capacitor defective Contact your dealer
Overcurrent circuit-breaker has
tripped
Reduce consumption
Air filter dirty Clean or replace the filter
The battery does not charge
up
The fuse is defective Change the defective fuse