Zgonc yellow PROFILINE YPL 6000-D, Translation Of Original Instruction Manual

Page: 18 / 56

18 | GB
2. Device description
1. Push bar
2. Tank indicator
3. Tank cover
4. Transport hook
5. Servicing cover
6. Castors
7. Ignition lock
8. Choke
9. Warning light for oil pressure
10. Voltmeter
11. Selector switch for 230V~/400V 3~
12. Safety trip 400V 3~
13. 1x 400V 3~ socket
14. Earthing connection
15. 12V DC connector
16. 12V DC safety trip
17. 2x 230V sockets
18. Safety trip 230V~
19. Battery mounting kit
20. Spanner
21. Battery
22. Oil dipstick
23.
Air filter
24. Brake lever
25. Brake
3. Scope of delivery
• Generator
• Manual
• 12V adapter cable
• Spanner
• Battery mounting kit
• Battery 12V / 30AH
4. Intended use
The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/opera-
tor, not the manufacturer, is responsible for damages
or injuries of any type resulting from this.
This power unit can power light bulbs, heaters, drills,
water pumps, etc. Do not exceed the load limit spec-
ified for the power unit.
The power unit may not be used to power devices
that have a high power requirement.
The power unit cannot be used for precision devices
such as computers. These precision devices may be
damaged by distortions caused by the broad wave
when the power unit‘s power is output.
Do not connect the power unit to the electrical instal-
lation of a building.
1. Introduction
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope you have a lot of fun and success using your
new machine.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• improper handling,
• noncompliance of the operating instructions,
• repairs by third parties, not by authorized service
technicians,
• installation and replacement of non-original spare
parts,
• non-intended use,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 571 13 / VDE 01 13 not being observed.
We recommend:
That you read through the entire operating instruc-
tions before putting the machine into operation.
These operating instructions are to assist you in get-
ting to know your machine and utilize its proper ap-
plications. The operating instructions contain impor-
tant notes on how you work with the machine safely,
expertly, and economically, and how you can avoid
hazards, save repair costs, reduce downtime and in-
crease the reliability and service life of the machine.
In addition to the safety requirements contained in
these operating instructions, you must be careful to
observe your country’s applicable regulations.
The operating instructions must always be near the
machine. Put them in a plastic folder to protect them
from dirt and humidity. They must be read by every
operator before beginning work and observed con-
scientiously. Only persons who have been trained in
the use of the machine and have been informed of
the various dangers may work with the machine. The
required minimum age must be observed.
In addition to the safety requirements in these oper-
ating instructions and your country’s applicable regu-
lations, you should observe the generally recognized
technical rules concerning the operation of identically
constructed devices.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.