Zetor Proxima CL 80, Operator'S Manual

Page: 53 / 210

PTO selection control lever
P18N016
a - independent revolutions of the PTO shaft drive - revolutions are dependent on the engine revolutions
n - neutral position
b - dependent revolutions of the PTO shaft drive through the gearbox - revolutions are dependent on the
shifted gear
Shifting is performed when the tractor is idling.
The neutral position of the gear shift lever of dependent and independent revolutions is indicated with the
symbol
N (1) on the display of the instrument panel.
When the tractor is operated and the rear PTO shaft is not used, the gear shift lever of
dependent and independent revolutions must always be in the neutral position (n).
PTO speed control lever
Lever of hand brake and hitch for single-axle trailer
a - 1,000 (540E) rpm
n - neutral
b - 540 rpm
540 and 1000 rpm shifting is possible
regardless of the 6-or 21-groove end-piece fitted. The
PTO speed and the end-piece type must be selected
depending on the specified speed of the attached
machine.
The 540 E is used to achieve 540 rpm of the PTO shaft
while maintaining economical engine speed.
PGPPN162
1. Hand brake lever.
2. Lever of the single-axle trailer hitch control.
When stopping or leaving the tractor you must
always secure the tractor with the parking brake.
If the tractor is standing on a slope, its wheel must be
additionally secured with wedges!
PGPPN163
ACQUAINTANCE WITH TRACTOR
52