Zetor Proxima CL 80, Operator'S Manual

Page: 206 / 210

Position regulation of the lifting of the rear three-point hitch 113
Possible adjustable tracks of the front wheels of the front
driving axle of the tractors
131
Pouring oil to engine 164
Power 193
Power regulation of the lifting of the rear three-point hitch 114
Preventive daily maintenance 27
Preventive daily maintenance. 21
Preventive daily service 27
Principles for operating tractors equipped with front end
loader
25
Procedure of draining liquid from the tyres 139
Procedure of filling the tyres with liquid 139
Proper clothing 16
Proper function of the heating and air-condition system 41
Protection of cab against aerosols 22
PTO drive of agricultural machines 97
PTO selection control lever 52
PTO speed control lever 52
Q
Quick-couplings with drip collection 120
R
Rear independent PTO shaft rotation 198
Rear PTO shaft - warning 98
Rear three-point hitch 123
Rear view mirrors 36
Rear wheel track change 136
Rear wheels wheel track 135
Rear window 34
Rear window wiper 46
Replaceable end points of rear PTO shaft 99
Replacement of oil filter element of pushing filter of the
brake system
173
Replacement of the transmission oil cleaner element with
hydraulic pump suction filter
173
Replacing coolant 170
Replacing dry filter locking element 166
Replacing full-continuous motor oil filter 164
Replacing oil and hydrostatic steering filter element 168
Replacing the hoses of hydrostatic steering 170
Replenish fuel 69
Reversing lever 51
Reversing lever 78
Reversion lever pin 161
Right rear panel 35
Risk of the tractor overturning 18
Road and reduced speeds shifting lever 51
Running-in the tractor 89
S
Safety cab 33
Safety instructions for lubrication of the tractor 159
Safety instructions for users 13
Safety labels 26
Safety principles of working with the three-point hitch 124
Securing lower draw bars with CBM hooks 127
Selection of holes in the bracket 126
Service brake adjustment 183
Service inspections 151
Setting of the display of the rear PTO shaft speed 98
Setting wheel stops with front drive axle 134
Shelf 35
Shifting road and reduced speeds 78
Short functional test 31
Side window 34
Signalling of driver's seat 70
Solid front drive axle 159
Specification of oil for the front driving axle 155
Specification of oil for the tractor hydrostatic control system 155
Specification of oils for Zetor engines equipped by diesel
particle filter
154
Specification of the oil for the gearbox housing and the final
drive housing
154
Specification of the oil for the portals 155
Starting the engine 71
Starting the engine 16
Starting the engine while using coolant heater 73
Steps performed daily before the start of work 151
Steps performed every 100 hours of work 151
Steps performed every 50 hours of work 151
Steps performed every 500 hours of work 151
Steps performed outside the interval of 500 hours of work 152
Stopping the engine 87
Stopping the tractor - manual brake 87
Sun screen 34
Swinging draw-bar console module 93
Swinging draw-bar console with a fixed pin module 93
Switch air-condition (C) 40
Switch box 49
Switch box key in the position (0) 49
Switch box key in the position (I) 49
Switch box key in the position (II) 49
Switch of warning lights 48
Symbols of tractor nodes 63
T
Technical data of engines 188
Technical maintenance of the tractors after a general
overhaul of the main groups
161
Tensile force 193
The button for temporary deactivation of brakes of the
trailer or semi-trailer
83
The buttons for activation of PTO shafts 101
The gauges of the tractor rear wheels equipped with solid
discs
136
The gear shift lever of dependent and independent
revolutions - low air pressure in the air-pressure system of
the tractor
97
The level of vibrations on driver´s seat 23
The liquid reservoir for control of the clutch 28
The rear PTO shaft - the gear shift lever of dependent and
independent revolutions
100
The rear PTO shaft - the gear shift lever of revolutions of
the PTO shaft
100
The socket for connection of the electrical installation of the
trailer or semi-trailer
86
Three-point hitch 160
Three-point hitch lowering speed control 111
Tilt steering wheel 39
Tilting and protrusion of steering wheel 39
Tools box 35
Towing bar 94
Tractor equipped with reductor for creeping gears - speed
30 km.h-1
196
Tractor equipped with reductor for creeping gears - speed
40 km.h-1
197
Tractor equipped with synchronized transmission and
reversor - speed 30 km.h-1
194
Tractor equipped with synchronized transmission and
reversor - speed 40 km.h-1
195
Tractor greasing plan 159
Tractor maintenance 151
Tractor shutdown and recommended points for tractor
lifting
179
Tractor travel speed (km/h) 194
Tractors equipped with front end loader 24
Trailer brakes 28
Transport use 91
Transportation of persons, operation 18
Travel speed calibration 68
Travelling down the slope 79
Travelling up the slope 79
Two-hose brakes 85
Tyres and wheels 31
U
Uncoupling of a single-axle trailer 95
Upper linkage bracket 160
Upper pull rod 126
Used pictograms 14
V
Valve for filling tyre tubes with liquid 138
Venting hydraulic circuit of hydrostatic steering 169
INDEX
205