Zetor FORTERRA 95, Operator'S Manual

Page: 66 / 197

66
RUNNING IN THE TRACTOR
F_02_48 F_02_49
GENERAL PRINCIPLES FOR RUNNING IN THE NEW TRACTOR IN THE
COURSE OF THE FIRST 100 HOURS OF OPERATION
During the first 100 operation hours:
- Load the engine normally
-
Avoid operation under partial loading of the engine
- Avoid excessive idle run
- Frequently check the oil level in the engine (increased oil consumption is normal in
this period).
- Check screw connections mainly of the supporting parts of the tractor.
- Immediately remove all established shortcomings; thus, you will prevent
subsequent damage and possible impairment of operation safety.
-
Proceed in the same way after a general overhaul of the tractor as well.
DURING THE FIRST 10 HOURS
- Run in the tractor in the transport
regime.
-
Tighten the fitting nuts of the front and
rear wheels, including the bead / rim
connections at the prescribed torque.