The Zeroplus Logic Analyzer
Installation Guide
The Zeroplus Logic Analyzer Installation Guide
Page 29
Fig 3-23 – Channel setup Window
Tip:
Channels
Setup
In Dialogue of Channels Setup, there isn’t only Add Bus/Signal, but also
Delete Bus/Signal, Delete All, Restore Defaults functions provided.
1. Delete Bus/Signal, first highlight the bus or channels on area 6 of Fig 3-23,
then click Delete Bus/Signal to delete it.
2. Delete All, click Delete All to delete all bus/signals on area 6 of Fig 3-23.
3.
Restore Defaults, click Restore Defaults to restore the dialogue of
Channels Setup as shown in Fig 3-21.
Step 3.
Set Trigger condition
1. Highlight the bus which will be triggered then click
icon or select Bus
from the Trigger of the Menu bar, the dialogue window as shown in Fig.
3-24 will appear.
Fig 3-24 – Bus Trigger Setup
Tip:
or double click on trigger column of the bus as shown in Fig 3-25.
Summary of Contents for LAP-321000U-A
Page 1: ......
